Twin over full bunk bed with desk – By combining a loft-style bunk bed with desk below you can open the floor area in your child’s room. It also creates the psychological benefit of defining a workplace where your child is able to do homework. This can help your child’s focus during the study time. These instructions are a twin-size bed with cheap material, but adjust sizes and replace wood for larger or more attractive projects.
12 Photos Gallery of: Twin Over Full Bunk Bed with Desk Ideas
Drill two holes in each end of 75-inch beams, placed 2-3 / 4 inches from the end of the beam and 3/4 inches apart. Use a drill with the same diameter as your bolts. Drill two holes at one end of 72-inch posts, placed at the center 12 inches and 12-3 / 4 inches from the end twin over full bunk bed with desk. Use a drill with the same diameter as your bolts. Gently slip all surfaces into your wood. It does not have to be polished smooth, but should be even enough to avoid splitting.
Pray the congregation
Place the two 75-inch beams and the two 36-inch beams in a rectangle, resting on the narrow side of twin over full bunk bed with desk. Set the rectangle so that the shorter beams are on the inside. Connect the rectangle with two wooden screws in each joint. Screw the screws in through the side of the long beam and at the end of the shorter beam. Attach larger plywood board to the frame with a wooden screw in each corner. Reinforce with a wooden screw centered along each side. Place two 72-inch posts side by side, about 3 feet apart. Set them so that the drilled holes are at the same ends, with the bore holes parallel to the floor.
Connect posts with a 50-inch plank. Place the plank so that the bottom runs 30-1 / 2 inches from the ends of services without holes, with the ends of the posts level with each other. Attach four screws to each insert, each screw in one corner of the rectangle formed by the shelf overlapping the post. Turn over posts and attach a second 50-inch plank opposite the first one. Screw in the same way, four screws per attachment point.